WEBER TTSC plus sheet-metal finishing machine
WEBER TTSC plus is a compact-class sheet-metal finishing machine with a 1,350 mm working width and three processing stations. Its D–P2–R2 configuration combines contact-roller sanding, planetary-head edge rounding and multi-rotation brushing for deburring, surface finishing and edge radii up to R2 on ferrous and non-ferrous sheet.
Technical specifications
| Manufacturer / publisher | Hans WEBER Maschinenfabrik |
|---|---|
| Manufacturer | Hans WEBER Maschinenfabrik / WEBER America |
| model | WEBER TTSC plus |
| sku | TTSC plus |
| Working width | 1350 mm |
| Processing stations | 3 |
| Workpiece thickness | 0.3–100 mm (technical specification) |
| Sanding belt drive | up to 19 kW |
| Controller | i-Touch |
| Systems | D,P2,R2 |
| Edge rounding | up to R2 |
| Category | Industrial grinding & sanding |
| Updated | 2026-10-13 23:39:38 |
Core machine specification
A headline on the same page also states 0.5–100 mm workpiece thickness, while the technical-specification block states 0.3–100 mm. Both values are retained here as a source-page discrepancy; machine selection should use the confirmed configuration specification.
| Model | WEBER TTSC plus |
|---|---|
| Working width | 1,350 mm |
| Processing stations | 3 |
| Workpiece thickness | 0.3–100 mm in the technical-specification block |
| Sanding-belt drive | Up to 19 kW |
| Control | i-Touch controller |
| Configured systems | D contact roller, P2 planetary head and R2 multi-rotation brush |
Processing units
The three stations are independently configurable. P2 targets uniform inner- and outer-contour rounding; R2 uses intermeshing vertical brushes and is positioned for coated, galvanized and thin sheet; the contact roller supports controlled material removal and surface work.
| D contact roller | Rubber-coated roller for deburring, rough grinding and surface grinding; multiple belt types can be used |
|---|---|
| P2 planetary head | Frequency-controlled speed 850–1,700 rpm; drive up to 5.2 kW; electrical height adjustment |
| R2 multi-rotation brush | 2.6 kW drive per unit; 30–150 rpm; cutting speed 5–20 m/s; electrical height adjustment |
| Edge-rounding result | Up to R2 is stated for the configured machine |
Workpiece and process scope
The oscillation control can be deactivated to help avoid visible oscillation marks. The page also describes program-controlled positioning of processing stations and automatic thickness measurement.
| Materials | Ferrous and non-ferrous sheet |
|---|---|
| Workpiece conditions | Perforated, foil-coated and scaled sheet are explicitly included |
| Processes | Deburring, edge rounding, slag or heavy laser-spatter removal and surface sanding |
| Standard equipment package | Vacuum table, automatic tool-length measurement and oscillation-free sanding-belt control |
Access and specification boundaries
Doors on both sides provide access to processing units; the P2 unit has a side pull-out and the rotary-brush area a tailgate. These access features support tool changes and maintenance.
The reviewed page does not supply a single overall machine footprint, mass, feed-speed range, electrical supply or required dust-extraction airflow. Those values are therefore not assigned to this record and must be confirmed for the ordered configuration.