M-Bond 610

Refer to the original PDF for tables, figures and page layout.

Page 1
Page 1/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
59.1.0
* 1 Identification
· Product name: M-Bond 610 Adhesive
· Part number: 71-20000
· Application of the substance / the mixture Adhesives
· Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
Allied High Tech Products Inc.
16207 Carmenita Road
USA-Cerritos, CA, 90703
USA
info@alliedhightech.com
· Information department: Product safety department
· Emergency telephone number:
During normal opening times: +1 (310) 635-2466
Chemtrec: +1 (202) 483-7616
2 Hazard(s) identification
· Classification of the substance or mixture
GHS02 Flame
Flammable Liquids 2
H225 Highly flammable liquid and vapor.
GHS08 Health hazard
Carcinogenicity 2
H351 Suspected of causing cancer.
GHS09 Environment
Aquatic Chronic 2
H411 Toxic to aquatic life with long lasting effects.
GHS07
Skin Irritation 2
H315 Causes skin irritation.
Eye Irritation 2A
H319 Causes serious eye irritation.
Sensitization - Skin 1
H317 May cause an allergic skin reaction.
Specific Target Organ Toxicity - Single Exposure 3 H335 May cause respiratory irritation.
(Contd. on page 2)


Page 2
Page 2/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Adhesive
(Contd. of page 1)
59.1.0
· Label elements
· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).
· Hazard pictograms
GHS02
GHS07
GHS08
GHS09
· Signal word Danger
· Hazard-determining components of labeling:
tetrahydrofuran
Polyglycidyl Ether of Phenol-Formaldehyde
· Hazard statements
Highly flammable liquid and vapor.
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
Suspected of causing cancer.
May cause respiratory irritation.
Toxic to aquatic life with long lasting effects.
· Precautionary statements
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Avoid breathing dust/fume/gas/mist/vapors/spray
Wash thoroughly after handling.
Use only outdoors or in a well-ventilated area.
Contaminated work clothing must not be allowed out of the workplace.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF exposed or concerned: Get medical advice/attention.
Call a poison center/doctor if you feel unwell.
Specific treatment (see on this label).
Take off contaminated clothing and wash it before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
Wash contaminated clothing before reuse.
In case of fire: Use CO2, powder or water spray to extinguish.
Collect spillage.
Store in a well-ventilated place. Keep container tightly closed.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3 Composition/information on ingredients
· Chemical characterization: Mixtures
· Description: Mixture of the substances listed below with nonhazardous additions.
(Contd. on page 3)


Page 3
Page 3/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Adhesive
(Contd. of page 2)
59.1.0
· Hazardous components and components with occupational exposure limits:
109-99-9 tetrahydrofuran
 Flammable Liquids 2, H225;
 Carcinogenicity 2, H351;
 Eye Irritation 2A, H319; Specific Target Organ
Toxicity - Single Exposure 3, H335
60-70%
28064-14-4 Polyglycidyl Ether of Phenol-Formaldehyde
 Aquatic Chronic 2, H411;
 Skin Irritation 2, H315; Sensitization - Skin 1, H317
25-30%
78-93-3 ethyl methyl ketone
 Flammable Liquids 2, H225;
 Eye Irritation 2A, H319; Specific Target Organ Toxicity - Single Exposure 3,
H336
5-<10%
· Additional information: The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.
4 First-aid measures
· Description of first aid measures
· General information: Immediately remove any clothing soiled by the product.
· After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
· After swallowing: If symptoms persist consult doctor.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed
Breathing difficulty
Headache
Dizziness
Coughing
Allergic reactions
Nausea
Dermatitis
Eye irritation
· Indication of any immediate medical attention and special treatment needed No further relevant information available.
5 Fire-fighting measures
· Extinguishing media
· Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
· Special hazards arising from the substance or mixture No further relevant information available.
· Advice for firefighters
· Protective equipment: Wear fully protective suit.
6 Accidental release measures
· Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Keep away from ignition sources
· Environmental precautions:
Do not allow product to reach sewage system or any water course.
Do not allow to enter sewers/ surface or ground water.
Prevent seepage into sewage system, workpits and cellars.
Inform respective authorities in case of seepage into water course or sewage system.
· Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to section 13.
Ensure adequate ventilation.
· Reference to other sections
See Section 7 for information on safe handling.
(Contd. on page 4)


Page 4
Page 4/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Adhesive
(Contd. of page 3)
59.1.0
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
· Handling:
· Precautions for safe handling
Protect from heat and direct sunlight.
Ensure proper ventilation/exhaustion at workplaces.
Open and handle receptacle with care.
Prevent formation of aerosols.
· Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles:
Protect from sunlight.
Store at temperatures not exceeding 35°C.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions:
Keep receptacle tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Store receptacle in a well ventilated area.
· Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
· Additional information about design of technical systems: No additional data. See 7.
· Control parameters
· Components with limit values that require monitoring at the workplace:
The following constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure limit.
At this time, the remaining constituent has no known exposure limits.
109-99-9 tetrahydrofuran
PEL Long-term value: 590 mg/m³, 200 ppm
REL Short-term value: 735 mg/m³, 250 ppm
Long-term value: 590 mg/m³, 200 ppm
TLV Short-term value: 100 ppm
Long-term value: 50 ppm
Skin, A3, BEI
78-93-3 ethyl methyl ketone
PEL Long-term value: 590 mg/m³, 200 ppm
REL Short-term value: 885 mg/m³, 300 ppm
Long-term value: 590 mg/m³, 200 ppm
TLV Short-term value: 150 ppm
Long-term value: 75 ppm
BEI, Skin
· Ingredients with biological limit values:
109-99-9 tetrahydrofuran
BEI 2 mg/L
Medium: urine
Time: end of shift
Parameter: Tetrahydrofuran
(Contd. on page 5)


Page 5
Page 5/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Adhesive
(Contd. of page 4)
59.1.0
78-93-3 ethyl methyl ketone
BEI 2 mg/L
Medium: urine
Time: end of shift
Parameter: Methyl ethyl ketone (nonspecific)
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.
· Protection of hands:
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
PVC or PE gloves
Recommended thickness of the material:  0.1 mm
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer
to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance
and has therefore to be checked prior to the application.
· Eye protection:
Tightly sealed goggles
9 Physical and chemical properties
· Information on basic physical and chemical properties
· General Information
· Appearance:
Form:
Liquid
Color:
Colorless
· Odor:
Ether-like
· Odor threshold:
Not determined.
· pH-value:
Not determined.
· Change in condition
Melting point/Melting range:
Undetermined.
Boiling point/Boiling range:
65.5 °C (149.9 °F)
· Flash point:
-14 °C (6.8 °F)
· Flammability (solid, gaseous):
Highly flammable.
· Auto igniting:
320 °C (608 °F)
· Decomposition temperature:
Not determined.
(Contd. on page 6)


Page 6
Page 6/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Adhesive
(Contd. of page 5)
59.1.0
· Ignition temperature:
Product is not selfigniting.
· Danger of explosion:
Product is not explosive. However, formation of explosive air/vapor mixtures are possible.
· Explosion limits:
Lower:
1.5 Vol %
Upper:
12 Vol %
· Vapor pressure at 20 °C (68 °F):
172 hPa (129 mm Hg)
· Density:
Not determined.
· Relative density
0.9 (Water =1)
· Vapor density
2.4 (Air=1)
· Evaporation rate
8.0 (BuAc=1)
· Solubility in / Miscibility with
Water:
Partly miscible.
· Partition coefficient (n-octanol/water): Not determined.
· Viscosity:
Dynamic:
Not determined.
Kinematic:
Not determined.
· Solvent content:
Organic solvents:
70.1 %
VOC content:
70.10 %
Solids content:
0.0 %
· Other information
No further relevant information available.
10 Stability and reactivity
· Reactivity No further relevant information available.
· Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· Possibility of hazardous reactions Reacts with amines.
· Conditions to avoid
Store at temperatures not exceeding 32°C.
Protect from sunlight.
Keep away from oxidising agents and acidic substances.
Do not mix with alkalis.
Keep away from heat.
Keep away from open flames. - No smoking.
· Incompatible materials: No further relevant information available.
· Hazardous decomposition products:
Explosive peroxides
Phenolic compounds
Carbon monoxide and carbon dioxide
· Additional information: Hazardous decomposition products may form during combustion.
11 Toxicological information
· Information on toxicological effects
· Acute toxicity:
· LD/LC50 values that are relevant for classification:
109-99-9 tetrahydrofuran
Oral
LD50 2,500 mg/kg (rat)
(Contd. on page 7)


Page 7
Page 7/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Adhesive
(Contd. of page 6)
59.1.0
78-93-3 ethyl methyl ketone
Oral
LD50 3,300 mg/kg (rat)
Dermal LD50 5,000 mg/kg (rabbit)
· Primary chemical irritant effect:
· on the skin: Irritant to skin and mucous membranes.
· on the eye: Irritating effect.
· Sensitization: Sensitization possible through skin contact.
· Additional toxicological information:
· Carcinogenic categories
· IARC (International Agency for Research on Cancer)
109-99-9 tetrahydrofuran
2B
· NTP (National Toxicology Program)
None of the ingredients is listed.
· OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12 Ecological information
· Toxicity
· Aquatic toxicity:
LC50 (48 h) 1-10 mg/l (oncorhynchus mykiss)
· Persistence and degradability No further relevant information available.
· Behavior in environmental systems:
· Bioaccumulative potential No further relevant information available.
· Mobility in soil No further relevant information available.
· Ecotoxical effects:
· Remark: Toxic for fish
· Additional ecological information:
· General notes:
Water hazard class 2 (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects No further relevant information available.
13 Disposal considerations
· Waste treatment methods
· Recommendation: Contact waste processors for recycling information.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.
· Recommended cleansing agent: Water, if necessary with cleansing agents.
14 Transport information
· UN-Number
· DOT, IMDG, IATA
UN1133
· UN proper shipping name
· DOT
Adhesives
(Contd. on page 8)


Page 8
Page 8/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Adhesive
(Contd. of page 7)
59.1.0
· IMDG
ADHESIVES, MARINE POLLUTANT
· IATA
ADHESIVES
· Transport hazard class(es)
· DOT
· Class
3 Flammable liquids
· Label
3 
· IMDG
· Class
3 Flammable liquids
· Label
3 
· IATA
· Class
3 Flammable liquids
· Label
3 
· Packing group
· DOT, IMDG, IATA
II
· Environmental hazards:
Product contains environmentally hazardous substances: Polyglycidyl
Ether of Phenol-Formaldehyde
· Marine pollutant:
Yes
Symbol (fish and tree)
· Special precautions for user
Warning: Flammable liquids
· Hazard identification number (Kemler code):
33
· EMS Number:
F-E,S-D
· Stowage Category
B 
· Transport in bulk according to Annex II of MARPOL73/78 and
the IBC Code
Not applicable.
· Transport/Additional information:
· DOT
· Quantity limitations
On passenger aircraft/rail: 5 L
On cargo aircraft only: 60 L
· Limited quantities (LQ)
5L
· Transport category
2 
· Tunnel restriction code
D/E
· IMDG
· Limited quantities (LQ)
5L
· Excepted quantities (EQ)
Code: E2
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 500 ml
(Contd. on page 9)


Page 9
Page 9/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Adhesive
(Contd. of page 8)
59.1.0
· UN "Model Regulation":
UN 1133 ADHESIVES, 3, II, ENVIRONMENTALLY
HAZARDOUS
15 Regulatory information
· Safety, health and environmental regulations/legislation specific for the substance or mixture
No further relevant information available.
· Sara
· Section 355 (extremely hazardous substances):
None of the ingredients is listed.
· Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
· TSCA (Toxic Substances Control Act):
All components have the value ACTIVE.
· Hazardous Air Pollutants
None of the ingredients is listed.
· Proposition 65
· Chemicals known to cause cancer:
109-99-9 tetrahydrofuran
· Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
· Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
· Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
To the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties
and does not establish a contractual legal relationship.
· Department issuing SDS: Technical Services
· Contact: Pablo Mendoza
· Last revision / supersedes version: 06/01/2024 / 3.0
· Supersedes date: 06/01/2022
· Abbreviations and acronyms:
ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by
Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
BEI: Biological Exposure Limit
Flammable Liquids 2: Flammable liquids – Category 2
Skin Irritation 2: Skin corrosion/irritation – Category 2
Eye Irritation 2A: Serious eye damage/eye irritation – Category 2A
(Contd. on page 10)


Page 10
Page 10/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Adhesive
(Contd. of page 9)
59.1.0
Sensitization - Skin 1: Skin sensitisation – Category 1
Carcinogenicity 2: Carcinogenicity – Category 2
Specific Target Organ Toxicity - Single Exposure 3: Specific target organ toxicity (single exposure) – Category 3
Aquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard – Category 2
· * Data compared to the previous version altered.   


Page 11
 
Page 1/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
59.1.0
* 1 Identification
· Product name: M-Bond 610 Curing Agent
· Part number: 71-20000
· Application of the substance / the mixture Hardening agent/ Curing agent
· Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
Allied High Tech Products Inc.
16207 Carmenita Road
USA-Cerritos, CA, 90703
USA
info@alliedhightech.com
· Information department: Product safety department
· Emergency telephone number:
During normal opening times: +1 (310) 635-2466
Chemtrec: +1 (202) 483-7616
2 Hazard(s) identification
· Classification of the substance or mixture
GHS02 Flame
Flammable Liquids 2
H225 Highly flammable liquid and vapor.
GHS08 Health hazard
Sensitization - Respiratory 1
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Carcinogenicity 2
H351 Suspected of causing cancer.
GHS05 Corrosion
Eye Damage 1
H318 Causes serious eye damage.
GHS07
Sensitization - Skin 1
H317 May cause an allergic skin reaction.
Specific Target Organ Toxicity - Single Exposure 3 H335 May cause respiratory irritation.
· Label elements
· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2)


Page 12
Page 2/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Curing Agent
(Contd. of page 1)
59.1.0
· Hazard pictograms
GHS02
GHS05
GHS07
GHS08
· Signal word Danger
· Hazard-determining components of labeling:
tetrahydrofuran
benzene-1,2:4,5-tetracarboxylic dianhydride
· Hazard statements
Highly flammable liquid and vapor.
Causes serious eye damage.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
May cause an allergic skin reaction.
Suspected of causing cancer.
May cause respiratory irritation.
· Precautionary statements
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Avoid breathing dust/fume/gas/mist/vapors/spray
Use only outdoors or in a well-ventilated area.
Contaminated work clothing must not be allowed out of the workplace.
Wear protective gloves/protective clothing/eye protection/face protection.
[In case of inadequate ventilation] wear respiratory protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a poison center/doctor.
IF exposed or concerned: Get medical advice/attention.
Specific treatment (see on this label).
If skin irritation or rash occurs: Get medical advice/attention.
If experiencing respiratory symptoms: Call a poison center/doctor.
Wash contaminated clothing before reuse.
In case of fire: Use CO2, powder or water spray to extinguish.
Store in a well-ventilated place. Keep container tightly closed.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3 Composition/information on ingredients
· Chemical characterization: Mixtures
· Description: Mixture of the substances listed below with nonhazardous additions.
· Hazardous components and components with occupational exposure limits:
109-99-9 tetrahydrofuran
 Flammable Liquids 2, H225;
 Carcinogenicity 2, H351;
 Eye Irritation 2A, H319; Specific Target Organ
Toxicity - Single Exposure 3, H335
80-90%
89-32-7 benzene-1,2:4,5-tetracarboxylic dianhydride
 Sensitization - Respiratory 1, H334;
 Eye Damage 1, H318;
 Sensitization - Skin 1, H317
5-10%
(Contd. on page 3)


Page 13
Page 3/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Curing Agent
(Contd. of page 2)
59.1.0
· Non-hazardous components:
89-05-4 benzene-1,2,4,5-tetracarboxylic acid
1-5%
· Additional information: The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.
4 First-aid measures
· Description of first aid measures
· General information: Immediately remove any clothing soiled by the product.
· After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing: If symptoms persist consult doctor.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed
Breathing difficulty
Headache
Dizziness
Coughing
Allergic reactions
Nausea
Dermatitis
Eye irritation
· Indication of any immediate medical attention and special treatment needed No further relevant information available.
5 Fire-fighting measures
· Extinguishing media
· Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
· Special hazards arising from the substance or mixture No further relevant information available.
· Advice for firefighters
· Protective equipment: Wear fully protective suit.
6 Accidental release measures
· Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Keep away from ignition sources
· Environmental precautions:
Do not allow product to reach sewage system or any water course.
Do not allow to enter sewers/ surface or ground water.
Prevent seepage into sewage system, workpits and cellars.
Dilute with plenty of water.
· Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralizing agent.
Dispose contaminated material as waste according to section 13.
Ensure adequate ventilation.
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
(Contd. on page 4)


Page 14
Page 4/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Curing Agent
(Contd. of page 3)
59.1.0
7 Handling and storage
· Handling:
· Precautions for safe handling
Protect from heat and direct sunlight.
Ensure proper ventilation/exhaustion at workplaces.
Open and handle receptacle with care.
Prevent formation of aerosols.
· Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles:
Protect from sunlight.
Store at temperatures not exceeding 27°C.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions:
Keep receptacle tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Store receptacle in a well ventilated area.
· Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
· Additional information about design of technical systems: No additional data. See 7.
· Control parameters
· Components with limit values that require monitoring at the workplace:
The following constituent is the only constituent of the product which has a PEL, TLV or other recommended exposure limit.
At this time, the remaining constituent has no known exposure limits.
109-99-9 tetrahydrofuran
PEL Long-term value: 590 mg/m³, 200 ppm
REL Short-term value: 735 mg/m³, 250 ppm
Long-term value: 590 mg/m³, 200 ppm
TLV Short-term value: 100 ppm
Long-term value: 50 ppm
Skin, A3, BEI
· Ingredients with biological limit values:
109-99-9 tetrahydrofuran
BEI 2 mg/L
Medium: urine
Time: end of shift
Parameter: Tetrahydrofuran
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.
(Contd. on page 5)


Page 15
Page 5/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Curing Agent
(Contd. of page 4)
59.1.0
· Protection of hands:
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer
to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance
and has therefore to be checked prior to the application.
· Eye protection:
Tightly sealed goggles
9 Physical and chemical properties
· Information on basic physical and chemical properties
· General Information
· Appearance:
Form:
Liquid
Color:
Amber colored
· Odor:
Ether-like
· Odor threshold:
Not determined.
· pH-value:
Not determined.
· Change in condition
Melting point/Melting range:
Undetermined.
Boiling point/Boiling range:
65.5 °C (149.9 °F)
· Flash point:
-14 °C (6.8 °F)
· Flammability (solid, gaseous):
Highly flammable.
· Auto igniting:
230 °C (446 °F)
· Decomposition temperature:
Not determined.
· Ignition temperature:
Product is not selfigniting.
· Danger of explosion:
Product is not explosive. However, formation of explosive air/vapor mixtures are possible.
· Explosion limits:
Lower:
1.5 Vol %
Upper:
12 Vol %
· Vapor pressure at 15 °C (59 °F):
193.3 hPa (145 mm Hg)
· Density at 20 °C (68 °F):
0.959 g/cm³ (8.003 lbs/gal)
· Relative density
0.9 (H2O=1)
· Vapor density
2.5 (Air=1)
· Evaporation rate
>1 (BuAc=1)
· Solubility in / Miscibility with
Water:
Fully miscible.
· Partition coefficient (n-octanol/water): Not determined.
(Contd. on page 6)


Page 16
Page 6/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Curing Agent
(Contd. of page 5)
59.1.0
· Viscosity:
Dynamic:
Not determined.
Kinematic:
Not determined.
· Solvent content:
Organic solvents:
88.2 %
VOC content:
88.21 %
Solids content:
11.8 %
· Other information
No further relevant information available.
10 Stability and reactivity
· Reactivity No further relevant information available.
· Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· Possibility of hazardous reactions Possible formation of peroxide.
· Conditions to avoid
Keep away from oxidising agents and acidic substances.
Keep away from heat.
Keep away from open flames. - No smoking.
· Incompatible materials: Mild steel
· Hazardous decomposition products:
Explosive peroxides
Carbon monoxide and carbon dioxide
· Additional information: Hazardous decomposition products may form during combustion.
11 Toxicological information
· Information on toxicological effects
· Acute toxicity:
· LD/LC50 values that are relevant for classification:
109-99-9 tetrahydrofuran
Oral LD50 2,500 mg/kg (rat)
89-32-7 benzene-1,2:4,5-tetracarboxylic dianhydride
Oral LD50 2,250 mg/kg (rat)
· Primary chemical irritant effect:
· on the skin: No irritant effect.
· on the eye: Strong irritant with the danger of severe eye injury.
· Sensitization:
Sensitization possible through inhalation.
Sensitization possible through skin contact.
· Additional toxicological information:
· Carcinogenic categories
· IARC (International Agency for Research on Cancer)
109-99-9 tetrahydrofuran
2B
· NTP (National Toxicology Program)
None of the ingredients is listed.
· OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
(Contd. on page 7)


Page 17
Page 7/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Curing Agent
(Contd. of page 6)
59.1.0
12 Ecological information
· Toxicity
· Aquatic toxicity:
LC50 (48 h) >100 mg/l (oncorhynchus mykiss)
· Persistence and degradability No further relevant information available.
· Behavior in environmental systems:
· Bioaccumulative potential No further relevant information available.
· Mobility in soil No further relevant information available.
· Additional ecological information:
· General notes:
Water hazard class 1 (Self-assessment): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Must not reach bodies of water or drainage ditch undiluted or unneutralized.
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects No further relevant information available.
13 Disposal considerations
· Waste treatment methods
· Recommendation: Contact waste processors for recycling information.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.
· Recommended cleansing agent: Water, if necessary with cleansing agents.
14 Transport information
· UN-Number
· DOT, IMDG, IATA
UN2056
· UN proper shipping name
· DOT
Tetrahydrofuran mixture
· IMDG, IATA
TETRAHYDROFURAN mixture
· Transport hazard class(es)
· DOT
· Class
3 Flammable liquids
· Label
3 
· IMDG, IATA
· Class
3 Flammable liquids
· Label
3 
· Packing group
· DOT, IMDG, IATA
II
(Contd. on page 8)


Page 18
Page 8/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Curing Agent
(Contd. of page 7)
59.1.0
· Environmental hazards:
· Marine pollutant:
No
· Special precautions for user
Warning: Flammable liquids
· Hazard identification number (Kemler code):
33
· EMS Number:
F-E,S-D
· Stowage Category
B 
· Transport in bulk according to Annex II of MARPOL73/78 and
the IBC Code
Not applicable.
· Transport/Additional information:
· DOT
· Quantity limitations
On passenger aircraft/rail: 5 L
On cargo aircraft only: 60 L
· Limited quantities (LQ)
1L
· Transport category
2 
· Tunnel restriction code
D/E
· IMDG
· Limited quantities (LQ)
1L
· Excepted quantities (EQ)
Code: E2
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 500 ml
· UN "Model Regulation":
UN 2056 TETRAHYDROFURAN MIXTURE, 3, II
15 Regulatory information
· Safety, health and environmental regulations/legislation specific for the substance or mixture
No further relevant information available.
· Sara
· Section 355 (extremely hazardous substances):
None of the ingredients is listed.
· Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
· TSCA (Toxic Substances Control Act):
All components have the value ACTIVE.
· Hazardous Air Pollutants
None of the ingredients is listed.
· Proposition 65
· Chemicals known to cause cancer:
109-99-9 tetrahydrofuran
· Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
· Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
· Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
(Contd. on page 9)


Page 19
Page 9/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: M-Bond 610 Curing Agent
(Contd. of page 8)
59.1.0
16 Other information
To the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties
and does not establish a contractual legal relationship.
· Department issuing SDS: Technical Services
· Contact: Pablo Mendoza
· Last revision / supersedes version: 06/01/2024 / 3.0
· Supersedes date: 06/01/2022
· Abbreviations and acronyms:
ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by
Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
BEI: Biological Exposure Limit
Flammable Liquids 2: Flammable liquids – Category 2
Eye Damage 1: Serious eye damage/eye irritation – Category 1
Eye Irritation 2A: Serious eye damage/eye irritation – Category 2A
Sensitization - Respiratory 1: Respiratory sensitisation – Category 1
Sensitization - Skin 1: Skin sensitisation – Category 1
Carcinogenicity 2: Carcinogenicity – Category 2
Specific Target Organ Toxicity - Single Exposure 3: Specific target organ toxicity (single exposure) – Category 3
· * Data compared to the previous version altered.