MOUNTING WAX DISSOLVER PRODUCT USE INSTRUCTIONS
Full searchable text · 1 pages
Refer to the original PDF for tables, figures and page layout.
Page 1 Product Guide www.alliedhightech.com Allied High Tech Products, Inc. Call for more information: 800.675.1118 Wax Dissolver Date: 10/2020, v1.1 Refer to the SDS document for additional safety information. Wax Dissolver (#71-10210) is a solvent used to remove sheet wax (#71-10400) from fixtures and samples. It should be stored at room temperature. Instructions 1. Place the sample and fixture on a hot plate and reheat the wax. Once the wax is soft, remove the sample. 2. Use a cotton-tipped applicator to apply the Wax Dissolver directly to the wax remaining on the sample and/or fixture by rolling the tip over the wax. If too much wax builds up on the applicator, discard it and continue with a new one. A lint free wipe or paper towel can also be used. Note: Using the wax dissolver while the fixture is still on the hot plate can make wax removal slightly faster. 3. Clean the sample in water, isopropyl alcohol or acetone to remove any residual Wax Dissolver. Technical Information Odor Citrusy Color Clear Solubility Not Miscible in Water Specific Gravity 0.843 Boiling Point 173 °C (343.4 °F) Flash Point 50 °C (122 °F) Ignition Point 255 °C (491 °F) Vapor Pressure at 50 °C (122 °F) 50.66 hPa (38 mm/Hg) Vapor Density 4.7 (Relative to Air = 1) GHS02 GHS07 GHS09