THE GLOBAL POLISHING & ABRASIVES DIRECTORY查看数据库覆盖情况 ↗
POLISHXEN
POLISHX/ATLAS Command wear-part system for ATLAS 70 and U70 wheels
Product & technical reference

ATLAS Command wear-part system for ATLAS 70 and U70 wheels

ATLAS Command is a coordinated main-wear-part system for existing ATLAS 70 and U70 blast wheels. Its revised internal geometry is intended to improve abrasive flow, slow media breakdown and direct more input energy to the casting surface without a conversion kit or wheel modification.

Technical profile

Manufacturer / publisherWheelabrator
Compatible wheelsATLAS 70; U70
Kit directionsClockwise; counter-clockwise
Kit contents8 blades; control cage; impeller
InstallationNo conversion kit or wheel modification stated
Abrasive reduction claimUp to 40%
Combined saving claim15–35% for wear parts and abrasive
CategoryMass finishing & blasting systems
Updated2026-10-14

System composition and compatibility

The system is offered as right-hand/clockwise and left-hand/counter-clockwise kits for ATLAS 70 and U70 blast wheels. Each kit contains eight throwing blades, a control cage and an impeller.

The components are designed to work as a coordinated wear set with extended, synchronised service life. Confirm wheel model and rotation before selecting the kit.

Operating principle

Optimised internal geometry manages abrasive flow through the blast wheel with the aim of reducing unnecessary media wear. Slower breakdown retains more usable abrasive and directs a greater share of the supplied energy toward the casting surface.

Because the system replaces routine wear parts, the reviewed configuration does not require a conversion kit or modification to the existing ATLAS 70/U70 wheel. Installation can be aligned with the next planned wear-part change.

Performance claims and verification

These are stated performance ranges, not guaranteed results for every process. Verify them against a documented baseline for media additions, throughput, motor load, cycle time, surface result and part life under comparable production conditions.

Abrasive-consumption claimUp to 40% reduction.
Combined-cost claim15–35% saving across wear parts and abrasive.
Downtime claimNo additional conversion downtime when installed during routine wear-part replacement.
Maintenance effectCoordinated parts are intended to simplify maintenance and make operating cost more predictable.

Installation and safety

Replace the coordinated components as a set according to the correct rotation. Inspect the wheel, hub, liners, fasteners and abrasive feed path while access is open, and verify that no retained media or debris obstructs movement.

Lock out the machine and confirm zero rotation before service. After assembly, check clearances and retention, conduct the approved low-risk startup and confirm the blast pattern before full production.

Files & downloads

atlas-command-wear-parts-atlas-70-u70-11599ab27f7a0ca6.html ↓ atlas-command-wear-parts-atlas-70-u70-11599ab27f7a0ca6.json ↓

Related products & technical information