Slurry CMP ad alta efficienza
-
Logistica veloce e sicura
-
Ricevi campioni gratuiti
Take a Closer Look
The acidic pH value is stable, maintaininga high and stable polishing rate.
Combines rough and fine polishing into a single process, greatly reducing process-ing costs and improving processingefficiency.
Test data
Microscope Photo
Semi-insulated 500X
Conductive 500X
Test Conditions and Parameter Settings
- Polishing object: 6-inch SiC substrate*3 pcs*2 Head
- Polishing pad: Suba 600
- Polishing slurry: SC-O80K (Grish)
- Pasting method: wax paste
- Pressure: 120Kg (220g/cm²)
- Speed: lower 66rpm, upper 60rpm
- Circulation barrel: 10L
- Chiller temperature: 20℃
- Polishing time: 4H
Conclusion
The total time of traditional rough polishing and fine polishing is 6-9 hours, and high-efficiency CMP can be used for 2-3 hours to meet polishing requirements.
After polishing with high-efficiency CMP, the Ra values that can be achieved on the carbon and silicon surfaces of silicon carbide are: Si: 0.115nm C: 0.127nm.
Specifiche
-
Specifiche
Parametri Contenuto Strumento di testing Dimensione delle particelle (nm) 70-90 Analizzatore di particelle laser Aspetto delle particelle Sferico SEM/TEM pH 3-4 Misuratore di pH Viscosità(cst) Viscometro Concentrazione (%) 5-10% Idrometro Imballaggio 25kg/5kg - Nota: Le personalizzazioni sono disponibili su richiesta. - -
Applicazioni
-
LED e semiconduttori
Grish provide polishing products for LED e semiconduttori polishing. We offer both wet and dry polishing suspensions, as well as oil-based and water-based formulations.
Read Di Più -
Vetro Ottico & Crystal
We offer a wide range of polishing products for optics, glass, and gemstones industries.
Read Di Più -
Materiali Ceramici e Preziosi
Grish provide powders and polishing slurry for Hard Ceramic, Sealing ring and Gemstone
Read Di Più -
3C
With the rise of mobile electronic devices, major manufacturers have put forward higher requirements for the surface processing.
Read Di Più