Microclear Supreme Aluminum Oxide Polishing Powder Series
Microclear Supreme is a low-dust aluminum oxide polishing powder family offered in Finish, Polish and Cut grades. Typical properties include pH 8.0–11.0, 75–100% alpha alumina and primary crystals of 0.3–0.5 µm, with blend particle ranges selected for the required removal rate and finish.
Technical profile
| Manufacturer / publisher | Micro Abrasives Corporation |
|---|---|
| Series | Microclear Supreme |
| Material | Aluminum oxide polishing powder |
| Grades | Supreme Finish, Supreme Polish and Supreme Cut |
| Typical pH | 8.0–11.0 |
| Typical alpha alumina | 75–100% |
| Category | Abrasive grains & powders |
| Updated | 2026-10-12 19:35:43 |
Series positioning
Supreme is a dry polishing-powder family formulated around three cut-to-finish positions. The supplier describes low-dust behaviour when used with the correct chemistry, fast removal and long working life at the point of use.
Because Supreme Cut is a blended material, coarse-particle content may vary. Grade labels and typical ranges are selection aids and do not replace an agreed incoming specification.
Typical properties
| Supreme Finish | Average particle size listed as greater than 2 µm |
|---|---|
| Supreme Polish | Average particle size 4–6 µm |
| Supreme Cut | Average particle size 4–15 µm; blended material |
| pH | 8.0–11.0 |
| Alpha alumina | 75–100% |
| Primary crystal size | 0.3–0.5 µm |
Applications
- Automotive clear-coat finishing
- Acrylic and stretched-acrylic polishing
- Marine surface finishing
- Chrome, aluminium and stainless-steel polishing
Packaging and validation
Standard packaging is listed as 110 lb drums and 500 lb or 1,000 lb bulk bags, with custom packaging possible. Before scale-up, validate dust control, dispersion, removal rate, gloss, scratch pattern and residue with the intended chemistry and polishing system.