THE GLOBAL POLISHING & ABRASIVES DIRECTORY查看数据库覆盖情况 ↗
POLISHXEN
POLISHX/Microclear Ultra Aluminum Oxide Polishing Powder Series
Product & technical reference

Microclear Ultra Aluminum Oxide Polishing Powder Series

Microclear Ultra is a dewatered aluminum oxide polishing powder family produced after wet milling. The series offers multiple nominal size grades for balancing stock removal and finish, with typical pH 9.2 and alpha-alumina content of 50–80%.

Technical profile

Manufacturer / publisherMicro Abrasives Corporation
SeriesMicroclear Ultra
MaterialAluminum oxide polishing powder
Available gradesUltra .5, .75, 1, 2, 4, 6, 8 and 12
Typical pH9.2
Typical alpha alumina50–80%
CategoryAbrasive grains & powders
Updated2026-10-12 19:32:12

Material architecture

The Ultra series is wet milled to establish its particle-size distribution and then dewatered to create a powder suitable for formulation. It uses the same core preparation route as the Microclear DS slurry family but is supplied dry.

The series is positioned to combine stock removal with final surface quality. Standard surface-area material is the normal offering; a high-BET version may be available by request.

Typical physical properties

AppearanceWhite powder
Ultra .5 average particle sizeGreater than 1 µm, as listed
Ultra 1 average particle sizeLess than 2 µm, as listed
Ultra 2 average particle size2.3 µm
Ultra 6 average particle size6 µm
Ultra 8 average particle size8 µm
Ultra 10/12 average particle size10 µm
pH9.2
Alpha alumina50–80%

Applications and grade selection

Listed substrates include automotive clear coats, marine surfaces, chrome, aluminium and stainless steel. Coarser grades generally provide a different cut-to-finish balance than finer grades, but the final response depends on formulation and process conditions.

Ultra .5, .75, 1, 2, 4, 6, 8 and 12 are series grade names. Do not substitute the grade number directly for a guaranteed particle-size limit; use the listed typical property for the chosen grade.

Handling and qualification

Typical values are guidance rather than release specifications. Confirm the required particle-size distribution, surface area and alpha-alumina content for the intended formulation. Control dust during powder handling and validate dispersion, removal rate, finish and residue on representative substrates.

Files & downloads

microclear-ultra-aluminum-oxide-polishing-powder-series-7a338e903bdd48c4.html ↓ microclear-ultra-aluminum-oxide-polishing-powder-series-7a338e903bdd48c4.json ↓

Related products & technical information