Microgrit WCA Platelet Alumina Powder Series
Microgrit WCA is a high-purity platelet alumina powder for precision surface finishing. Its discrete crystals are stated above 99% purity with a 5:1 aspect ratio, smooth surfaces and high fracture resistance, supporting lapping and polishing with controlled contact pressure and reduced abrasive loading.
Technical profile
| Manufacturer / publisher | Micro Abrasives Corporation |
|---|---|
| Series | Microgrit WCA |
| Material | Alumina powder |
| Stated hardness | |
| Stated purity | Above 99% |
| Particle shape | Platelet crystal with smooth surface |
| Category | Abrasive grains & powders |
| Updated | 2026-10-12 19:34:41 |
Particle architecture
WCA consists of discrete alumina crystals with smooth platelet surfaces and a stated aspect ratio of 5:1. The platelets orient parallel to the lap and work surface, spreading pressure over a wider contact area than a more equiaxed abrasive.
High resistance to fracture is intended to prolong abrasive life, while uniform particle quality is used to reduce random scratching and subsurface damage in precision finishing.
Documented process positioning
| Purity | Above 99% alumina |
|---|---|
| Aspect ratio | 5:1 |
| Suggested WCA slurry loading | 15–20% abrasive-to-vehicle ratio |
| Typical fused-alumina comparison | 30–50% abrasive-to-vehicle ratio |
| Manufacturing route | Hydraulic classification |
Application range
- Precision optics, optical glass, quartz and germanium
- Piezo-electronic and semiconductor materials
- Precision bearings and lapping operations
- Buffing compounds for stainless and hardened steels
- Ferrous, non-ferrous and mineral surfaces
Slurry control
Suspension treatment and loading must be matched to the vehicle, settling tolerance and required finish. The stated loading comparison is process guidance, not a universal recipe. Validate removal rate, subsurface damage, scratching and slurry stability with the selected grade and actual workpiece.