Wheel brushes for table-deburring machines, crimped wire | EUPBWB025 | Osborn GmbH
EUPBWB025 is a dense crimped-wire wheel-brush family for table deburrers and automated machines. Its statically balanced body and high wire count support cutting-edge deburring of pipes, profiles and flat parts across multiple workpiece and burr classes.
Technical profile
| Manufacturer / publisher | Osborn |
|---|---|
| Category | Industrial grinding & sanding |
| Updated | 2026-10-11 20:34:53 |
Construction and balance
The brush uses a compact, high-density crimped-wire trim to increase the number of working wire tips. The body is statically balanced for concentric running on production equipment.
Common table-deburrer interfaces are supported through regular bores and double-keyway adaptations; special adapters are also possible.
Material and burr range
The family is listed for aluminium, cast materials, non-ferrous metals, sintered metal, wood, stainless steel and steel. Available fill choices include steel and stainless-steel wire.
Wire diameters shown for the family include 0.20, 0.30, 0.35 and 0.50 mm, allowing aggression and conformity to be matched to the burr class.
Documented configuration
One listed variant has a 250 mm diameter, 60 mm face width and 45 mm trim length. It uses 0.20 mm steel wire and a 100 mm round arbor hole.
Its maximum speed is 3,600 rpm and the displayed SKU is 0002-576145.
Production use
Choose wire material to avoid cross-contamination where stainless or non-ferrous surfaces must retain corrosion performance or appearance. Set penetration at the wire tips and keep the work securely supported.
Check adapter retention, balance, guards and speed marking before operation; replace brushes that develop abnormal vibration or uneven trim loss.