Microclear DS Aluminum Oxide Polishing Slurry Series
Microclear DS is a water-based aluminum oxide polishing slurry family supplied at 37.5–38.5% solids. Six listed size grades extend from 0.9 µm to 10 µm average particle size, with typical pH 9.2 and alpha-alumina content of 80–90%.
Technical profile
| Manufacturer / publisher | Micro Abrasives Corporation |
|---|---|
| Series | Microclear DS |
| Material | Aluminum oxide polishing slurry |
| Typical solids | 37.5–38.5% |
| Typical pH | 9.2 |
| Grades | DS .5, DS1, DS2, DS6, DS8 and DS10/12 |
| Category | Compounds & slurries |
| Updated | 2026-10-12 19:37:09 |
Material and supply form
The DS series is a wet-milled polishing alumina supplied as a water-based white slurry. Calcination is controlled by surface-area specification, with standard and high surface-area versions described for different polishing responses.
The slurry form reduces the need to disperse a dry powder at the point of use. Solids, particle distribution and surface area remain key inputs to removal rate and finish.
Typical properties
| DS .5 average particle size | 0.9 µm |
|---|---|
| DS1 average particle size | 1.5 µm |
| DS2 average particle size | 2.3 µm |
| DS6 average particle size | 6.0 µm |
| DS8 average particle size | 8.2 µm |
| DS10/12 average particle size | 10 µm |
| Solids | 37.5–38.5% |
| pH | 9.2 |
| Alpha alumina | 80–90% |
Applications
- Automotive clear-coat finishing
- Marine surface polishing
- Chrome, aluminium and stainless-steel finishing
- Plastic and acrylic polishing
Process and storage controls
Typical values are guidance, not finished-process guarantees. Confirm grade, surface-area version and any requested special chemistry before qualification. Maintain slurry homogeneity during storage and use, prevent contamination, and validate removal rate, gloss, residue and scratch pattern on representative workpieces.