THE GLOBAL POLISHING & ABRASIVES DIRECTORYExplore database coverage ↗
POLISHX中文
POLISHX/Microgrit PXA Unfused Aluminum Oxide Powder Series
Product & technical reference

Microgrit PXA Unfused Aluminum Oxide Powder Series

Microgrit PXA is a family of unfused aluminum oxide powders for polishing and buffing compositions, tumbling creams and lapping compounds. Eight listed grades vary by absorption figure and average particle size, spanning nominal averages from 0.75 µm to 5.0 µm.

Technical profile

Manufacturer / publisherMicro Abrasives Corporation
SeriesMicrogrit PXA
MaterialUnfused aluminum oxide
Listed gradesPXA #101, #101H, #102, #103, #201, #301, #401 and #411
Average particle-size span0.75–5.0 µm across listed grades
CategoryAbrasive grains & powders
Updated2026-10-12 19:31:50

Series construction

The PXA series uses unfused aluminum oxide prepared in ceramic-lined equipment to reduce metal contamination. Particle size and absorptive behaviour are controlled so formulators can select a grade for cutting, colouring or fine finishing.

The powders are intended for incorporation into polishing and buffing compositions, tumbling creams and lapping compounds. They are also described for wet or dry tumbling and for metallographic or crystallographic specimen finishing.

Grade comparison

PXA #101Absorption 23.0; average 2.5 µm; listed range 1–8 µm
PXA #101HAbsorption 23.5; average 2.0 µm; listed range 1–6 µm
PXA #102Absorption 22.0; average 3.0 µm; listed range 1–10 µm
PXA #103Absorption 21.5; average 2.5 µm; listed range 1–8 µm
PXA #201Absorption 19.5; average 5.0 µm; listed range 2–10 µm
PXA #301Absorption 24.5; average 1.5 µm
PXA #401Absorption 25.5; average 1.0 µm
PXA #411Absorption 26.0; average 0.75 µm

Application positioning

  • PXA #101 and #101H for colour-oriented formulations
  • PXA #102 and #103 for general chrome rouge compositions
  • PXA #201 for stainless cut-and-colour work
  • PXA #301 and #401 for progressively finer chrome colouring
  • PXA #411 for fine chrome colouring and marble polishing

Formulation and validation

Absorption and particle-size values are selection inputs, not finished-process guarantees. Final cut, colour, dispersion stability and residue depend on binder or carrier chemistry, abrasive loading, contact media and machine conditions. Validate the formulation on the actual substrate before production release.

Files & downloads

microgrit-pxa-unfused-aluminum-oxide-powder-series-57b557bc121096d8.html ↓ microgrit-pxa-unfused-aluminum-oxide-powder-series-57b557bc121096d8.json ↓

Related products & technical information